Ender Drives in All the Mods 10
All the Mods 10 8.3 ships version 1.5.23 · First seen in 2.43
Ender Drives is a mod in All the Mods 10 8.3, where it is version 1.5.23. EnderDrives is a mod that offers a way to store your items in the End, but digitally (Summary from the mod's Modrinth page.)
Ender Drives guide for All the Mods 10
Last verified for All the Mods 10 v8.3 on Oct 17, 2026 · text last changed Oct 17, 2026
Also applies to:FTB Skies 2 1.22.0 to 1.24.0FTB Skies 2: Aero 1.0.3 to 1.10.0FTB StoneBlock 4 1.19.0 to 1.23.0
- Sections
- 6
- Recipes shown
- 11
- Items named
- 16
Every recipe and number here was checked against All the Mods 10 8.3, read from the running game on Oct 16, 2026.
What is Ender Drives?
4 parts
Ender Drives gives you a different way to store items. Drives link together by frequency, so every drive with the same frequency and privacy shares the same contents, no matter who crafted it. It works whether the drive sits in your AE2 system, in another dimension, or in another player's system.[1][2]
The pack includes Ender Drives 1.5.23 for NeoForge 1.21.1. It has been in the pack since version 2.42 or earlier.[3]
What every drive is set with
- Frequency: drives on the same frequency share one virtual inventory.[2]
- Scope: Global (the default, open to any player on that frequency), Private (tied to your UUID, though other users of your ME system can still access the storage) or Team (shared with your FTB Team).[2]
- Mode: Bidirectional (the default), Input-Only or Output-Only.[2]
Types, not bytes
Unlike traditional AE2 drives, an Ender Drive is limited only by item types. Each type can hold up to 9,223,372,036,854,775,807 items (2^63 - 1). The power cost grows with the number of items stored at that frequency, so a huge stockpile isn't free to run.[2]
How many types your server can handle depends on the server. The mod's guide describes an autobenchmark command that you can use to test it.[2]
Tape Disks for NBT-heavy gear
The mod also adds Tape Disks, AE2-compatible storage cells for items with NBT data, such as enchanted armor, tools and other non-stackable gear. They keep these items out of the type space on your big drives. Tape Drives do not tell AE2 that they are preferred for matching items, so use ME Drive priority to control where items go.[1][4]
Who it's for
If you run an AE2 setup and want storage shared across dimensions, bases or teammates, this mod is for you. Tape Disks are useful when your drives fill up with unique gear.[1][2][4]
Unverified Where Ender Drives fits in this pack's progression is unconfirmed. The sources show no quests for the mod and no ATM Star path involvement.
How do you get started with Ender Drives?
6 parts
Ender Drives give you storage that is shared by frequency. Every drive with the same frequency and privacy shares the same contents, no matter who crafted it, which dimension it is in, or whose ME system it sits in. So the plan is simple: make one cell, set it up, and build from there.[1][2]
Step 1: Make a 1k Ender Storage Component
Everything starts with the 1k Ender Storage Component. It is the smallest tier of the component line, and it is the part that gives a cell its capacity. The pack changed this recipe, so don't rely on what you remember from the mod's defaults.[5]
Crafting Shaped
Recipe id: enderdrives:ender_storage_component_1k_advanced
Step 2: Make an Ender Item Housing
Next you need the Ender Item Housing, the shell that a component goes into. The pack changed this recipe too.[5]
Crafting Shaped
| Empty slot | ||
Recipe id: enderdrives:ender_item_housing_advanced
Then combine them into a 1k Ender Item Storage Cell
Put the housing and the component together to get your first 1k Ender Item Storage Cell. This recipe is the mod's own, unchanged by the pack. It is shapeless, so the arrangement in the grid doesn't matter.[5]
Before you use it
Every Ender Drive is set up with a frequency, a scope and a mode. Drives with the same frequency and scope all access the same virtual inventory. The mode defaults to Bidirectional (insert and extract freely), and the scope defaults to Global.[2]
Step 4: Scale up
Once the 1k cell works for you, the pack has recipes for the 4k Ender Storage Component, 16k Ender Storage Component, 64k Ender Storage Component and 256k Ender Storage Component, and each of those recipes is marked as changed by the pack. Each component pairs with a housing to make the matching cell, such as the 4k Ender Item Storage Cell or the 256k Ender Item Storage Cell. Here is the 4k component as an example of the step up.[5]
Crafting Shaped
Recipe id: enderdrives:ender_storage_component_4k_advanced
The 4k component is built from the 1k component, and the pack changed this recipe.
Ender Drives are limited by the number of item types, not by item count, so you can store a huge amount of each type. Just remember that the power cost rises with the amount stored on the drive at that frequency.[2]
Optional: fluids and NBT-heavy gear
For fluids, the same flow applies with the Ender Fluid Housing, which has its own pack-changed recipe. Combine it with a component to get a cell like the 1k Ender Fluid Storage Cell.[5]
Crafting Shaped
| Empty slot | ||
Recipe id: enderdrives:ender_fluid_housing_advanced
Crafting Shapeless
Recipe id: enderdrives:ender_fluid_disk_1k_storage
If your normal drives are filling up with armor, tools and enchanted gear, look at the Tape Disk Item Storage Cell. It only accepts items with non-standard NBT, armor, tools or non-stackable items, and it keeps them out of your big drives' type space. The pack changed its recipe.[4][5]
Crafting Shaped
| any netherite ingot | any netherite ingot |
Recipe id: enderdrives:tape_disk
How does Ender Drives work?
7 parts
Ender Drives work differently from normal AE2 drives. Instead of keeping items inside the cell you carry, every drive points at a shared virtual inventory. All drives with the same frequency and privacy share the same contents, whoever crafted them. That holds in your own AE2 system, in another dimension, or on another player's system.[1][2]
Frequency, scope and mode
Each Ender Drive is configured with three settings. The frequency decides which shared inventory you are using. The scope decides who can access it. The mode decides how items flow. Drives with the same frequency and scope all access the same virtual inventory, no matter where they are.[2]
Transfer modes
- Bidirectional (the default): standard ME drive behavior, so you can insert and extract freely.[2]
- Input Only: items can go in but not come out. This is handy for buffers or syncing inputs.[2]
- Output Only: items can be extracted but not inserted. This suits output buffers or read-only access.[2]
The current mode shows in the cell's tooltip, next to a count of used and available types.[6]
Scope and privacy
- Global (the default): public. Any player using the same frequency can access the shared inventory.[2]
- Private: tied to your UUID, so only you can create drives that access that frequency. Other users of your ME system can still access the storage.[2]
- Team: shared with your FTB Team. All members can create drives with access to the same frequency.[2]
Limits are about types, not item counts
Unlike traditional AE2 drives, the only hard limit on an Ender Drive is the number of item types. Each type can hold up to 2^63 - 1 items, which is 9,223,372,036,854,775,807. The catch is that the power cost rises with the number of items stored on the drive at that frequency.[2]
How many types your server can handle depends on the server. You can test it with the autobenchmark command. Open a terminal with a drive on Private at the frequency you want to test. The benchmark keeps running until TPS drops below 18, which can take a few minutes. The mod author's personal average is about 275,000 types, but they have seen higher and lower suggestions. That type limit is shared between everyone using the drives on the same world.[2]
The exact command syntax isn't covered in the sources I have, so check in-game for it.[2]
Item and fluid cells
The item cells run from 1k Ender Item Storage Cell up through 4k Ender Item Storage Cell, 16k Ender Item Storage Cell, 64k Ender Item Storage Cell and 256k Ender Item Storage Cell. Fluid versions also exist, such as 1k Ender Fluid Storage Cell, 16k Ender Fluid Storage Cell and 256k Ender Fluid Storage Cell. Fluid cells report their usage as fluid types in the tooltip, and cells can show how many items or fluids they are partitioned to.[5][6]
Each cell can be made from a housing plus a matching storage component. Item cells use Ender Item Housing and fluid cells use Ender Fluid Housing. This is the mod's own recipe, shown here for the 1k item cell:[5]
The pack also changed the "advanced" recipes, which are an alternative route to the same cells. Here is the pack's version for the 1k item cell:[5]
Crafting Shaped
Recipe id: enderdrives:ender_disk_1k_advanced
The fluid cells have their own advanced recipe in the pack, shown here for the 1k fluid cell:[5]
Crafting Shaped
Recipe id: enderdrives:ender_fluid_disk_1k_advanced
Tape Disks for NBT-heavy items
Tape Disks are AE2-compatible cells built for items with lots of NBT, such as tools, armor and enchanted gear, which normally eat type space on regular drives. A Tape Disk only accepts items with non-standard NBT, armor, tools or other non-stackable items. Plain stackable items with no NBT are rejected.[4]
Tape Disks enforce two limits. The type limit is the maximum number of unique item types stored. The byte limit is based on the NBT size of each item, so items with many tags, like Apotheosis gear, use more space. The tooltip shows how many bytes are used out of the total.[4][6]
- Tape Drives do not tell AE2 that they are preferred for matching items, so use ME Drive priority to route items to them.[4]
- A Tape Disk throttles itself automatically during IO Port transfers. This stops NBT-heavy items from being dumped all at once and freezing your game.[4]
- Like Ender Disks, a second copy of the same Tape Disk on one ME network goes inactive.[6]
Admin commands and server settings
The mod includes an /enderdrives clear command. After a cell export (dumpcell), the EnderDrive data is not cleared automatically, so you are told to use the clear command once you have verified the export. A tape info command reports a tape's serialized bytes and whether it is loaded in memory. Servers can also disable these items, in which case the tooltip says so.[6]
Unverified This pack ships no config files for Ender Drives that I could check, so any server-side limits or power costs beyond what is described above are unverified.
How do you progress through Ender Drives?
5 parts
Ender Drives progression in this pack is a ladder of capacity tiers: 1k, 4k, 16k, 64k and 256k. The same ladder exists for item cells and for fluid cells. A separate Tape Disk sits beside the ladder for gear-type items. The pack changed most of the recipes along the way, so follow the recipe blocks below rather than the mod's defaults.[5]
Step 1: Storage components
Everything starts with the storage component. The entry point is the 1k Ender Storage Component, and the pack changed its recipe. From there the components climb through the 4k Ender Storage Component, 16k Ender Storage Component and 64k Ender Storage Component to the 256k Ender Storage Component. You craft them in that order, and the pack changed every one of these recipes.[5]
Crafting Shaped
Recipe id: enderdrives:ender_storage_component_1k_advanced
The entry-level component, with a recipe changed by the pack.
Crafting Shaped
Recipe id: enderdrives:ender_storage_component_4k_advanced
Each step up the ladder uses the previous component, and the pack changed these recipes too.
Step 2: Housings
To turn a component into a usable cell you can use a housing. The Ender Item Housing is for item cells and the Ender Fluid Housing is for fluid cells. In this pack both housings use changed recipes.[5]
Crafting Shaped
| Empty slot | ||
Recipe id: enderdrives:ender_item_housing_advanced
Item housing, recipe changed by the pack.
Crafting Shaped
| Empty slot | ||
Recipe id: enderdrives:ender_fluid_housing_advanced
Fluid housing, recipe changed by the pack.
Building the cells
Each cell tier can be made two ways. The first is the shapeless route: combine a housing with the matching component. That recipe is the mod's own and the pack did not change it. The second is the pack-changed shaped route, which builds the cell straight from the matching component with no separate housing needed.[5]
Housing plus component. Swap in the matching component for each tier up to 256k.
Crafting Shapeless
Recipe id: enderdrives:ender_disk_256k_storage
The same housing route at the top item tier, the 256k cell.
Crafting Shaped
Recipe id: enderdrives:ender_disk_1k_advanced
The one-craft route for the 1k item cell, changed by the pack.
Crafting Shaped
Recipe id: enderdrives:ender_disk_256k_advanced
The one-craft route for the 256k item cell, changed by the pack.
The item cells run from the 1k Ender Item Storage Cell up through the 4k Ender Item Storage Cell, 16k Ender Item Storage Cell and 64k Ender Item Storage Cell to the 256k Ender Item Storage Cell. The fluid cells follow the same sizes, from the 1k Ender Fluid Storage Cell up to the 256k Ender Fluid Storage Cell. The fluid versions of the one-craft route differ from the item versions, as the recipe below shows.[5]
Crafting Shaped
Recipe id: enderdrives:ender_fluid_disk_1k_advanced
The one-craft route for the 1k fluid cell, changed by the pack.
Crafting Shapeless
Recipe id: enderdrives:ender_fluid_disk_1k_storage
Fluid housing plus component, the mod's own recipe, unchanged by the pack.
The Tape Disk
The Tape Disk Item Storage Cell is a different branch with no size tiers, and the pack changed its recipe. It only accepts NBT-heavy, non-stackable or customized items such as enchanted armor, tools, enchanted books and potions. Plain stackable items are refused.[4][5]
Crafting Shaped
| any netherite ingot | any netherite ingot |
Recipe id: enderdrives:tape_disk
Tape Disk, recipe changed by the pack.
What a tier actually gives you
Ender Drives don't limit you by item count like normal AE2 drives. The only hard limit is the number of item types, and each type can hold up to 9,223,372,036,854,775,807 items. The catch is that power cost rises with the amount stored at that frequency. The in-game guide also notes that servers start to stress at different type counts, with a personal average of about 275,000 types.[2]
How does Ender Drives work with other mods?
4 parts
Ender Drives is built to sit inside an Applied Energistics 2 (AE2) network. In this pack, every Ender Drives recipe that links to other mods is marked as changed by the pack, and they all pull in items from AE2 and Advanced AE.[1][5]
AE2 is the home for your drives
The mod's own guide describes its drives as working in your AE2 system. Drives that share a frequency and privacy share the same contents, whether they are in your AE2 system, another dimension, or another player's system.[1][2]
The Tape Disk is described as an AE2-compatible storage cell. It stores NBT-heavy items, and the guide uses Apotheosis gear as an example of items that take up a lot of NBT space. It will not tell AE2 that it is preferred for matching items, so you need to use ME Drive priority to control where items go.[4]
Advanced AE and AE2 materials in the crafting chain
In this pack, the housings, storage components and finished cells are all crafted with Advanced AE materials combined with AE2 materials. Higher component tiers are made by upgrading the previous tier's component, so you climb the chain one step at a time.[5]
The two housings are the first thing you will build. The Ender Item Housing needs an ender chest, and the Ender Fluid Housing needs an AE2 sky stone tank.[5]
Crafting Shaped
| Empty slot | ||
Recipe id: enderdrives:ender_item_housing_advanced
The item housing as crafted in this pack, changed from the mod's own recipe.
Crafting Shaped
| Empty slot | ||
Recipe id: enderdrives:ender_fluid_housing_advanced
The fluid housing as crafted in this pack, changed from the mod's own recipe.
The base 1k Ender Storage Component is where Advanced AE's quantum parts come in, along with a shattered singularity and an ender pearl. From there, each tier is crafted from the one before it, for example the 4k component from the 1k.[5]
Crafting Shaped
Recipe id: enderdrives:ender_storage_component_1k_advanced
Crafting Shaped
Recipe id: enderdrives:ender_storage_component_4k_advanced
The finished cells combine a matching storage component with the same family of AE2 and Advanced AE parts. Item cells such as 1k Ender Item Storage Cell also use an ender chest, while fluid cells such as 1k Ender Fluid Storage Cell use an AE2 sky stone tank instead. The same pattern repeats at every tier, up to 256k Ender Item Storage Cell and 256k Ender Fluid Storage Cell.[5]
Crafting Shaped
Recipe id: enderdrives:ender_disk_1k_advanced
Crafting Shaped
Recipe id: enderdrives:ender_fluid_disk_1k_advanced
The Tape Disk
The Tape Disk Item Storage Cell recipe stays on the AE2 side. It is built from AE2 materials plus a netherite ingot, with no Advanced AE parts in it.[5]
Crafting Shaped
| any netherite ingot | any netherite ingot |
Recipe id: enderdrives:tape_disk
FTB Teams
The Team scope on a drive shares its frequency with your FTB Team, and all team members can create drives that access the same frequency.[2]
Unverified No quests in this pack involve Ender Drives, so this section is based on recipes only and does not cover any quest-based progression.
What changed in Ender Drives between versions?
1 part
All the Mods 10 8.1 ships Ender Drives 1.5.23, in the file enderdrives-neoforge-1.21.1-1.5.23.jar. The mod has been in the pack since 2.42 or earlier. Here is how its version changed from release to release.[3]
Release by release
- 2.42: Ender Drives 1.2.2 was added to the pack.[7]
- 2.43: updated from 1.2.2 to 1.3.2.[8]
- 2.44: the changelog lists 1.3.2 -> 1.2.4, so the pack moved back to an older version number.[9]
- 2.47: updated from 1.2.4 to 1.4.2.[10]
- 4.3: updated from 1.4.2 to 1.4.3.[11]
- 4.12: updated from 1.4.3 to 1.4.4.[12]
- 5.3: the changelog shows Ender Drives 1.4.4 added and an entry called EnderDrives removed. The version stayed at 1.4.4, so this looks like a pack-entry swap rather than an upgrade.[13]
- 6.1 and 6.2: each release lists an update from 1.4.4 to 1.4.4, so the version number did not change.[14][15]
- 8.0: updated from 1.4.4 to 1.5.23, the version you have in 8.1.[16]
Unverified The pack changelogs only record version numbers. What changed inside Ender Drives between versions (new features, fixes, recipe or balance changes), and why the pack went back to 1.2.4 in 2.44 or re-listed 1.4.4 in 5.3, 6.1 and 6.2, is unverified because no mod changelogs are available.
Sources
- In-game guide: EnderDrives Introduction (enderdrives) · official docs
- In-game guide: Ender Item Storage Cell (enderdrives) · official docs
- All the Mods 10 8.1 mod list · pack file
- In-game guide: Tape Disk Item Storage Cell (enderdrives) · official docs
- All the Mods 10 8.1 recipe dump: recipes making Ender Drives items · pack recipe dump
- enderdrives tooltips and descriptions (English lang file) · official mod data
- All the Mods 10 changelog (All the Mods 10 2.42) · changelog
- All the Mods 10 changelog (All the Mods 10 2.43) · changelog
- All the Mods 10 changelog (All the Mods 10 2.44) · changelog
- All the Mods 10 changelog (All the Mods 10 2.47) · changelog
- All the Mods 10 changelog (All the Mods 10 4.3) · changelog
- All the Mods 10 changelog (All the Mods 10 4.12) · changelog
- All the Mods 10 changelog (All the Mods 10 5.3) · changelog
- All the Mods 10 changelog (All the Mods 10 6.1) · changelog
- All the Mods 10 changelog (All the Mods 10 6.2) · changelog
- All the Mods 10 changelog (All the Mods 10 8.0) · changelog
Where this guide comes from
Written from what All the Mods 10 itself ships: its files and recipes, the in-game guidebooks and the mods' own pages. Every statement links to the source it came from, and the numbers are checked against the pack before publishing.
Guide last verified Oct 17, 2026.
Guides for other versions: 6.0 to 7.3 · 4.6 to 5.5 · 4.3 to 4.5 · 2.43
Report wrong info
Version in each release
36 releases, first in 2.43
| All the Mods 10 | Version | Jar | Where it came from |
|---|---|---|---|
| 8.3 Oct 15, 2026 | 1.5.23 | enderdrives-neoforge-1.21.1-1.5.23.jar | From the published release |
| 8.2 Sep 22, 2026 | 1.5.23 | enderdrives-neoforge-1.21.1-1.5.23.jar | From pack files |
| 8.1 Aug 29, 2026 | 1.5.23 | enderdrives-neoforge-1.21.1-1.5.23.jar | From pack files |
| 8.0 Aug 14, 2026 | 1.5.23 | enderdrives-neoforge-1.21.1-1.5.23.jar | From pack files |
| 7.3 Aug 2, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 7.2 Jul 20, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 7.1 Jun 26, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 7.0 May 15, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.6 Apr 7, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.5 Apr 7, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.4 Apr 4, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.3 Apr 2, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.2.1 Mar 31, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 6.2 Mar 24, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.1 Mar 7, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From pack files |
| 6.0 Feb 25, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 5.5 Jan 31, 2026 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 5.4 Dec 21, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 5.3.1 Dec 4, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 5.2 Nov 28, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 5.1 Nov 14, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 5.0 Nov 13, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 4.15 Nov 11, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 4.14 Oct 18, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 4.13 Oct 18, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 4.12 Oct 2, 2025 | 1.4.4 | enderdrives-neoforge-1.21.1-1.4.4.jar | From the published release |
| 4.11 Sep 20, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.10 Aug 24, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.9 Aug 23, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.8 Aug 23, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.7 Aug 23, 2025 | 1.4.3 | - | Reconstructed |
| 4.6 Aug 19, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.5 Jul 29, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.4 Jul 13, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 4.3 Jul 12, 2025 | 1.4.3 | enderdrives-neoforge-1.21.1-1.4.3.jar | From the published release |
| 2.43 Apr 13, 2025 | 1.3.2 | enderdrives-neoforge-1.21.1-1.3.2.jar | From the published release |
"From pack files" means the list came from the pack's own files; "from the published release" means ForgeBase read the jars of the release itself.
Items and blocks
20 items from the 8.3 recipe dump.
16k Ender Item Storage Cell
1k Ender Item Storage Cell
256k Ender Item Storage Cell
4k Ender Item Storage Cell
64k Ender Item Storage Cell
Creative Ender Item Storage Cell
16k Ender Fluid Storage Cell
1k Ender Fluid Storage Cell
256k Ender Fluid Storage Cell
4k Ender Fluid Storage Cell
64k Ender Fluid Storage Cell
Creative Ender Fluid Storage Cell
Ender Fluid Housing
Ender Item Housing
16k Ender Storage Component
1k Ender Storage Component
256k Ender Storage Component
4k Ender Storage Component
64k Ender Storage Component
Tape Disk Item Storage Cell
Which All the Mods 10 mods work with Ender Drives?
The All the Mods 10 mods that share the most recipes with Ender Drives. Highlighted ones have a guide.
Comments and tips
Loading comments...