Extreme sound muffler in All the Mods 10: To the Sky

Same as in the All the Mods 10 2.12 guide

Extreme Sound Muffler is a client-side quality-of-life mod that lets you turn down or silence individual sounds in the game. Instead of dropping your master volume and losing everything, you pick the exact sound that is bothering you and muffle just that one.^[1]

This pack ships version 3.48.3, built for NeoForge on Minecraft 1.21. It has been part of the pack for a long time, included since version 0.55 or earlier.^[2]

It is client-side only, so installing it on a server does nothing. That also means everything you configure is yours alone and will not affect anyone else you play with.^[1]

Who it is for

If you are running a big automated base, this is the mod that saves your ears. Anything that makes a repeated noise you would rather not hear can be muffled selectively, with a volume slider so you can dial a sound down instead of removing it entirely.^[1]

It also has Anchors, which are ranged mufflers. You place an Anchor at a position and give it a name and a range, then muffle sounds only inside that area. That way your noisy mob farm stays quiet where it sits, but the same sounds still play everywhere else in the world.^[1]

Where it fits in progression

There is no progression to speak of here. There are no recipes, no items to unlock and no quests tied to this mod in the pack, and it is not part of the ATM Star path. It is available from the moment you load in, and you will get the most out of it once you start building machines and farms that make noise on a loop.^[1][2]

To open it, click the button in your inventory screen or bind a key for it. If the inventory button annoys you, you can drag it somewhere else by holding right-click on it, or disable it in the config entirely.^[1]

Same as in the All the Mods 10 8.1 guide

Good news: Extreme Sound Muffler is a client-side mod, so there's nothing to craft or gather before you start. It lets you muffle sounds selectively, and you set it up entirely from its screen. Installing it on a server does nothing, because it only runs on your own game.^[1]

Unverified I couldn't confirm any in-pack recipes, items or quests for this mod, so there are no recipe blocks here. Everything below comes from the mod's project page and describes the mod's own behavior. Check the pack's config before relying on specific defaults.

Muffle your first sound

1. Click the muffler button in your inventory, or assign a key to open the screen.^[1]
2. Click the button next to the sound you want to muffle.^[1]
3. Optional: drag the slider to set the volume of that sound instead of silencing it completely.^[1]
4. Optional: press the play button to check that it's the sound you want to muffle.^[1]

The play button is worth using. Many sounds have similar names, and a quick test saves you from muting the wrong one.^[1]

Use Anchors for local quiet

Anchors are ranged mufflers. They're for when you want to muffle a sound only in a small area, such as around your machine room, while keeping it everywhere else.^[1]

1. Open the muffler screen.^[1]
2. Select one of the 10 numbered buttons.^[1]
3. Press the marker-like button on the right panel to set the Anchor position.^[1]
4. Optional: press the edit Anchor button next to the marker to set the Anchor's name and range.^[1]
5. Muffle the sounds you want for that Anchor.^[1]

Tweak the setup

If the inventory button is in the way, hold right mouse button over it and drag it somewhere else. You can also disable it in the config if you'd rather use a key.^[1]

The mod is highly configurable. You can move the muffle and play buttons to the left or right of the screen, disable Anchors, blacklist sounds so they don't appear in the screen, and choose the default muffle volume. It also has a dark mode that you enable in the config.^[1]

Same as in the All the Mods 10 2.11 guide

Extreme Sound Muffler is a client-side mod, so everything it does happens on your machine only. Installing it on a server does nothing at all, and there are no blocks, machines or power systems involved: the whole mod is a GUI that decides which sounds your client is allowed to play.^[1]

The muffler screen

You open the mod's screen either by clicking the button in your inventory or by assigning a key to it. Inside, you get a list of sounds with a button next to each one; clicking that button muffles the sound. Each entry also has a slider so you can set exactly how loud the sound stays instead of silencing it completely, and a play button so you can preview a sound and confirm it's the one you actually want to deal with.^[1]

Anchors: muffling by area

Anchors are the mod's ranged mufflers. Instead of silencing a sound everywhere in the world, an anchor muffles it only inside a small area you define, which is what you want for a noisy machine room or a single farm you don't want to hear from across the base.^[1]

1. Open the muffler screen.^[1]
2. Select one of the 10 numbered buttons, each one is a separate anchor slot.^[1]
3. Press the marker-like button on the right panel to set the anchor's position at where you're standing.^[1]
4. Optionally press the edit anchor button, next to the marker, to give the anchor a name and set its range.^[1]
5. Muffle the sounds you want while that anchor is selected, and they'll only be quieted inside its range.^[1]

Anchors aren't permanent placements. You can move one whenever you like by pressing the marker button again, which re-anchors it to your current spot, handy when you rebuild a farm or move your base.^[1]

The inventory button

The muffler button that shows up in your inventory screen is movable and optional. Hold right mouse button over it and drag it wherever you want if it's sitting on top of something important, or turn it off entirely in the config and use a keybind instead.^[1]

What's configurable

The mod exposes a fair amount of behaviour through its config file, so you can tune the interface and the defaults rather than fighting them.^[1]

• Put the muffle and play buttons on the left or right side of the screen, whichever reads better for you.^[1]
• Disable anchors entirely if you only ever want global muffling.^[1]
• Blacklist sounds so they never show up in the muffler screen at all, which keeps the list manageable in a big pack.^[1]
• Set the default muffle volume that new entries start at.^[1]
• Disable the inventory button.^[1]
• Enable dark mode for the GUI.^[1]

Unverified The pack ships no config file for this mod, so the mod's own defaults apply until you open the settings yourself. The exact option names, value ranges and where the file is written aren't covered by the sources available here.

Same as in the All the Mods 10 2.11 guide

Extreme Sound Muffler is a client-side mod, so its settings live in your own config file rather than on the server. Installing it on a server does nothing at all, which means every option here is yours alone to tweak and nothing you change affects other players.^[1]

The mod ships separate config files for Forge and Fabric, and most of the interesting behaviour is adjustable from there. These are the options players usually end up hunting for.^[1]

• Dark mode for the ESM screen, which is off until you turn it on in the config.^[1]
• The inventory button, which you can disable entirely if you would rather not see the muffler icon on your inventory screen.^[1]
• Button placement, letting you move the muffle and play buttons to the left or right side of the screen for easier reading.^[1]
• Anchors, the ranged mufflers, which can be disabled if you only ever want global muffling.^[1]
• A sound blacklist, so noisy entries you never want to touch stop cluttering the ESM screen.^[1]
• The default muffle volume applied when you mute a new sound.^[1]

Unverified The pack does not ship a config file for this mod in the sources available here, so the exact default values (including the default muffle volume and whether dark mode, anchors or the inventory button start enabled) could not be confirmed. Open the config in-game or in your instance folder to see what you are actually running.

All the Mods 10: To the Sky 2.0.4 ships Extreme sound muffler 3.56 (the NeoForge 1.21 build), and the mod has been in the pack since version 1.0 or earlier. Below are the notable changes from the mod's own changelogs, newest first.^[3]

Mod changelog highlights

• 3.56: Fixed Anchors breaking when they were created out of order. This is the version in the pack right now.^[3][4]
• 3.55: Optimization changes.^[5]
• 3.54: Added a config option for the maximum Anchor range and another to mute whole mods. The logo was made square again for Mod Menu, and the configs now have their defaults commented.^[6]
• 3.51: Updated the pt_br translation.^[7]
• 3.49.2: Added Turkish localization.^[8]

The 3.54 release is the one worth knowing about as a player, because it brought the options for Anchor range and for muting entire mods.^[6]