RFTools Builder: FTB Skies 2 config options

If true a holo hud with current progress is shown above the builder

This is a list of blocks that are either blacklisted or whitelisted from the Builder when it tries to move tile entities (format <id>=<cost>)

Whitelist or blacklist block NBT data from being transferred over, set `true` to whitelist block, set `false` to blacklist block, every block not included in the list is blacklisted by default (format <id>=<boolean>)

If true we allow the clearing quarry cards to be crafted (these can be heavier on the server)

If true we go back to the old (wrong) sphere/cylinder calculation for the builder/shield

If true we allow quarry cards to be crafted

If true the quarry will chunkload a chunk at a time. If false the quarry will stop if a chunk is not loaded

Use this block for the builder to replace with

If true the quarry will also quarry tile entities. Otherwise it just ignores them

If true we allow shape cards to be crafted. Note that in order to use the quarry system you must also enable this

Can Tile Entities be moved? 'forbidden' means never, 'whitelist' means only whitelisted, 'blacklist' means all except blacklisted, 'allowed' means all

Compression codec to use for projector preview planes. LEGACY_RLE is the previous path, PACKED_BITS uses palette-sized bit packing for comparison

Log aggregated statistics about projector preview packet compression. Intended as a diagnostic for scan/blockstate-heavy previews

Set this to false if you don't want invisible shield rendering mode to be possible

The volume for the projector sound (0.0 is off)

The amount of milliseconds before the client will remove shape render data that hasn't been used. Decreasing this will free memory faster at the cost of having to update shape renders more often

Height of the beacon in case beacons are used

The amount of milliseconds that a scanline 'flash' will exist on the client

Maximum RF storage that the builder can hold

RF per entity move operation for the builder

Base RF per block operation for the builder when used as a pump

RF per block operation for the builder when used to build

RF per player move operation for the builder

Base RF per block operation for the builder when used as a quarry or voider (actual cost depends on hardness of block)

RF per block that is skipped (used when a filter is added to the builder)

RF per tick that the builder can receive

The cost of collecting an item (builder 'collect items' mode))

The RF/t per area to keep checking for items in a given area (builder 'collect items' mode))

The cost of collecting 1 XP level (builder 'collect items' mode))

How many ticks we wait before collecting again (with the builder 'collect items' mode)

How much more expensive a move accross dimensions is

The RF per operation of the builder is multiplied with this factor when using the fortune quarry shape card

Maximum dimension of the shape when a shape card is used in the builder

Maximum offset of the shape when a shape card is used in the builder

Maximum dimension for the space chamber

The base speed (number of blocks per tick) of the quarry

Multiply the infusion factor with this value and add that to the quarry base speed

The RF per operation of the builder is multiplied with this factor when using the silk quarry shape card

The RF per operation of the builder is multiplied with this factor when using the void shape card

Maximum RF storage that the mover controller can hold

RF per tick that the mover controller can receive

Amount of RF used for one movement

RF per tick/per block for the vehicle control module

RF per tick/per block for the vehicle status module

Maximum amount of entities in a single block to show markers/beacons for

Additional amount of RF per 16x16x16 subchunk needed for a filtered scan

Maximum amount of 16x16 chunks we support for energy scanning

Maximum RF storage that the locator can hold

RF per tick that the locator can receive

Fixed amount of RF needed for a scan

Base amount of RF needed for a scan per 16x16x16 subchunk

Additional amount of RF per 16x16x16 subchunk needed for a scan for low energy

Additional amount of RF per 16x16x16 subchunk needed for a scan for hostile entities

Additional amount of RF per 16x16x16 subchunk needed for a scan for passive entities

Additional amount of RF per 16x16x16 subchunk needed for a scan for players

Maximum dimension of the shape when a scanner/projector card is used

Maximum offset of the shape when a shape card is used in the scanner/projector

The amount of 'surface area' that the server will send to the client for the projector. Increasing this will increase the speed at which projections are ready but also increase the load for server and client

How many projector preview planes to aggregate before logging one compression summary line

Maximum RF storage that the projector can hold

How many ticks to wait before sending the next projector preview plane to clients. Increase this to spread setup load over time

RF per tick that the projector can receive

RF/t for the projector while it is in use

Amount of RF needed per tick during the scan for a remote scanner

Maximum RF storage that the scanner can hold

RF per tick that the scanner can receive

Amount of RF needed per tick during the scan

The amount of surface area the scanner will scan in a tick. Increasing this will increase the speed of the scanner but cause more strain on the server

Number of ticks between every scan of the locator

The looting kill bonus

Maximum distance at which you can add disjoint shield sections to a composed shield

Maximum dimension of the shape when a shape card is used

Maximum offset of the shape when a shape card is used

Amount of dimensional shards per looting kill. Remember that this is per block that does damage

The amount of damage to do for a single spike on one entity

Maximum RF storage that the shield block can hold

Maximum size (in blocks) of a tier 1 shield

Base amount of RF/tick for every 10 blocks in the shield (while active)

RF/tick for every 10 blocks added in case of camo mode

The amount of RF to consume for a single spike of damage for one entity

The amount of RF to consume for a single spike of damage for one entity (used in case of player-type damage)

RF per tick that the shield block can receive

RF/tick for every 10 block addeds in case of shield mode