Master Ball

In order to get our Master Ball, we're going to need the AllTheModium Metal Pokeballs. In order to get the AllTheModium Metal Pokeballs, we're going to need AllTheModium Metal Apricorns. In order to get those we'll need to visit The Other.

Allthemodium, Vibranium, and Unobtainium. The three AllTheModium Metals. Hopefully you've gone through their own Quest Chapter before using these Quests... In order to make the PokeBalls we'll need quite a few of these Ingots. Yeah, it is expensive. For Mechanisms, you'll need to turn a few of these Ingots into Plates in order to...

Asks for: Allthemodium Ingot, Unobtainium Ingot, Vibranium Ingot

Don't worry Soul Lava hasn't moved in any recent updates! Check deep underground in The Other or in Piglin Villages in The Other.

Asks for: Soul Lava Bucket

If we want to create our favorite Pokeballs, we'll need to use Create! And that all starts with the Andesite Alloy! Follow through Creates own Quest Page to better understand how the Mod works.

Asks for: Andesite Alloy

The Mechanical Saw works like most Create Machines. Give it Rotational Power, and any Items that go through will be sliced in half. The Precision Sawmill is a Factory Machine from Mekanism. It is very easy to use! Throw some Energy into it, then place the Apricorn into the Machine, and it will slice and dice them into Half Apricorns! The Assembly Line will need quite a few Machines to get working: Assembly Controller, Laser, Input Unit, Export Unit, and the Assembly Platform. All Machines will need to be sitting next to each other connected to work. The Controller is the one that takes Pressure. The Input Unit will need an Inventory near it to take from, and the Export Unit will need a Chest to place Items in. If everything is working it'll say it is running. If not, the Controller will state the problem! The Fragment Forge, like all greedy Oritech Factories, will need Machine Casings to be made. 3 to be exact. Once you have the 3 Machine Casings and the Fragment Forge placed down, Right Click the Forge to Build it. Then, it becomes much easier, just power it up and toss your Apricorns in! Last is the Cut Glyph. First, use whatever Spell Form you'd like. Touch, Ray, Projectile, Missile, whatever! Then, select the Cut Glyph and add Sensitive to it. This will allow Cut to work on Items Dropped. So now you can toss your Apricorns on the flow, hit them with the Spell, and it'll magically cut them up.

Asks for: Glyph Cut, Mechanical Saw, Precision Sawmill, Fragment Forge, Assembly Controller

Half Apricorns! Which don't do much but make Lids... Sorry if you were expecting much from them.

Asks for: Half Black Apricorn, Half Blue Apricorn, Half Green Apricorn, Half Pink Apricorn, Half Red Apricorn, Half White Apricorn

The Encased Fan is a fun Create Machine. When given Rotational Power Clockwise, it will blow Items and Mobs away from it. When Rotated Counterclockwise it will suck the Items and Mobs closer to it. Don't worry, it just gets better! We can put Water in front of the Encased Fan to Wash Items Dropped in front of the Fan. We can Wash our Half Apricorns to make our Ball Lids.

Asks for: Encased Fan

The Color of the Half Apricorn determines which Lid we get. Plus we get Dye from it! If we Smelt a Ball Lid we can get a Blank Ball Lid. These can be Dyed into other Lids. Another Lid we have is the Apricorn Lid. These can be made from a few ways, but all involve using Apricorn Logs from Apricorn Trees. Either use an Assembly Line with Lasers or a Fragment Forge to turn normal Apricorn Logs into Apricorn Lids. Or use a Mechanical Saw on a Stamped Apricorn Log.

Asks for: Apricorn Wood Ball Lid, Black Ball Lid, Blank Ball Lid, Blue Ball Lid, Green Ball Lid, Pink Ball Lid

Sometimes we need a special Ball Lid in order to make a certain Pokeball we want. To get those we'll need to chop up some Ball Lids in order to get Apricorn Bits. So toss those Ball Lids through the Saw or whatever you want to use!

Asks for: Glyph Cut, Mechanical Saw, Precision Sawmill, Fragment Forge, Assembly Controller

Apricorn Bits don't do much. Can't eat them or give them to Pokemon. You can only use Deployers to mix Apricorn Bits and Dyes with Ball Lids to make other Lids.

Asks for: Black Apricorn Bits, Blue Apricorn Bits, Green Apricorn Bits, Pink Apricorn Bits, Red Apricorn Bits, White Apricorn Bits

Ancient Mechanisms are made in the almost exact way that normal Mechanisms are, just instead of costing a Nugget they cost an entire Ingot. Yep, they're more expensive! These are the only way to Craft Ancient Allthemodium, Vibranium, and Unobtainium Balls.

Asks for: Ancient Allthemodium Ball Mechanism, Ancient Unobtainium Ball Mechanism, Ancient Vibranium Ball Mechanism

Tumblestone is found by Brushing Suspiscious Sand or Gravel in certain Ruin Structures around your World. Once you get some, you can place it next to Lava or Magma to let it Grow overtime like Amethyst. It will Bud and when you harvest larger ones they'll Drop more Tumblestone. Some Recipes will require Tumblestone Coating or Dust. To get them, you need to Crush Tumblestone into Tumblestone Dust. You can either use certain Machines to Inject the Tumblestone or use a Mixer to Mix it with Water and make our Tumblestone Coating.

Asks for: Tumblestone

Ancient Vibranium Lids are made just like Ancient Allthemodium Lid. Just toss some Tumblestone onto a Vibranium Lid and boom! Ancient Vibranium Lid.

Asks for: Ancient Vibranium Ball Lid

The Ancient Allthemodium Ball Lid is just the normal Allthemodium Ball Lid with Tumblestone added on. With 2 Tumblestone Dust we can use a Pressure Chamber or an Atomic Forge to combine them. Or we can use a Metallurgic Infuser to Infuse the Lid with the Tumblestone Dust. If we have it as a Coating already we can use the Spout to drip the Coating onto the Lid.

Asks for: Ancient Allthemodium Ball Lid

Ancient Unobtainium Lid are upgrades to Vibranium Lids. You'll need a Block of Unobtainium and Unobtainium Apricorn Bits added onto an Ancient Vibranium Lid. We can use an Atomic Forge or Pressure Chamber to combine these ingrediants. Or use a Spout to drip a Blocks worth of Unobtainium onto the Lid then Deploy the Unobtainium Apricorn Bits into it.

Asks for: Ancient Unobtainium Ball Lid

We can use an Assembler, Pressure Chamber, or Create to make our Ancient Vibranium Balls. With the Pressure Chamber or Assembler just toss in the Ancient Vibranium Mechanism, Ancient Vibranium Lid, Apricorn Lid, and Iron Rod. For the Create Factories start with the Mechanism, then Deploy the Vibranium Lid, then the Apricorn Lid, and last put in the Iron Rod to complete our Ancient Vibranium Ball!

Asks for: Ancient Vibranium Ball

By taking one of our Blue Lids from the previous Quests, we can make a Great Ball Lid. Deploy 2 Red Apricorn Bits on top of that Blue Lid to make a Great Ball Lid. Obviously we can use that to make a Great Ball, but why not an even greater Ball than that! I'm talking about the Great Ball of Fire, not a Greater Ball...

Asks for: Great Ball Lid

With either an Atomic Forge, Pressure Chamber, or Create Factory we can make our Ancient Allthemodium Ball. We'll need our Ancient Allthemodium Mechanism, an Iron Rod, an Apricorn Lid, and an Ancient Allthemodium Lid. The Pressure Chamber and Assembler just combine them in shapeless Crafting, the Create Factory is different. You'll start with the Ancient Allthemodium Mechanism, then Deploy the Ancient Allthemodium Lid, then Deploy the Apricorn Lid, and finally Deploy the Iron Rod.

Asks for: Ancient Allthemodium Ball

In The Other you'll find Apricorn Trees, just these come with a different type of Apricorn! Allthemodium and Vibranium Apricorns! The Trees act just like normal Apricorn Trees, you can pluck the shiny Apricorns off the Tree, chop it down for the Wood, and replant them for more Apricorn Trees. Once you have collected Allthemodium and Vibranium Apricorns you can trade with a Poké Mart Trader for the final one, Unobtainium.

Asks for: Allthemodium Apricorn, Unobtainium Apricorn, Vibranium Apricorn

The Mechanical Saw works like most Create Machines. Give it Rotational Power, and any Items that go through will be sliced in half. The Precision Sawmill is a Factory Machine from Mekanism. It is very easy to use! Throw some Energy into it, then place the Apricorn into the Machine, and it will slice and dice them into Half Apricorns! The Assembly Line will need quite a few Machines to get working: Assembly Controller, Laser, Input Unit, Export Unit, and the Assembly Platform. All Machines will need to be sitting next to each other connected to work. The Controller is the one that takes Pressure. The Input Unit will need an Inventory near it to take from, and the Export Unit will need a Chest to place Items in. If everything is working it'll say it is running. If not, the Controller will state the problem! The Fragment Forge, like all greedy Oritech Factories, will need Machine Casings to be made. 3 to be exact. Once you have the 3 Machine Casings and the Fragment Forge placed down, Right Click the Forge to Build it. Then, it becomes much easier, just power it up and toss your Apricorns in! Last is the Cut Glyph. First, use whatever Spell Form you'd like. Touch, Ray, Projectile, Missile, whatever! Then, select the Cut Glyph and add Sensitive to it. This will allow Cut to work on Items Dropped. So now you can toss your Apricorns on the flow, hit them with the Spell, and it'll magically cut them up.

Asks for: Glyph Cut, Mechanical Saw, Precision Sawmill, Fragment Forge, Assembly Controller

Cut it by throwing it through the Mechanical Saw, powering and working a Sawmill or Fragment Forge. Or even process it through a whole Assembly Line! Plus there's Magic, Magic is always cool. Whatever you do, take your Apricorns and cut them in half.

Asks for: Half Allthemodium Apricorn, Half Unobtainium Apricorn, Half Vibranium Apricorn

4 of the ways to cut up the Halves are the same. The only new one is the... Atomic Forge! A very cool and flat Machine. Now needing 8 Machine Casings. The Atomic Forge doesn't get Energy like normal Machines, instead it needs it Laser-ed into it! With Enderic Lasers. Power up an Enderic Laser then use the Target Designator to Shift Right Click the Atomic Forge then the Enderic Laser. (If) It works, you can toss your Apricorn Halves in to get some Bits out.

Asks for: Glyph Cut, Mechanical Saw, Precision Sawmill, Atomic Forge, Assembly Controller

Fun sized pieces of Apricorns perfect for snacking and Crafting our AllTheModium Metal Lids!

Asks for: Allthemodium Apricorn Bits, Unobtainium Apricorn Bits, Vibranium Apricorn Bits

The Ancient Origin Ball Lid starts out with a simple Red Pokeball Lid. 1. Deploy Netherite Scraps onto it. 2. Spout Lava into it. 3. Press it. 4. Spout Tumblestone into it. 5. Spout Light Tumblestone into it. 6. Spout Dense Tumblestone into it. Then repeat it again and you'll get your Lid!

Asks for: Ancient Origin Ball Lid

Stamp them! Check out the Quests for all Pokeballs to see about the Rubber Stamp. You can Right Click the top or the hand of the Deployer to give it an Item, like the Rubber Stamp. Then, when at work, it will use that Stamp on Items below it. Or you can use the CNC Stamper! A Mekanism Machine that uses Energy to do the same exact thing, just easier.

Asks for: Deployer, CNC Stamper

Okay technically you don't have to Stamp them. Some can just stay like normal Plates.

Asks for: Allthemodium Plate, Unobtainium Plate, Vibranium Plate, Allthemodium Stamped Plate Lid, Unobtainium Stamped Plate Lid, Vibranium Stamped Plate Lid

Depending if your Plates are Stamped or not determines which Machine you can use. If it is Stamped you can use the Mechanical Press to make the Ball Bases. If not, try these! The Assembly Line connects different Assembly Machines together to work together at processing Items. Place down the Assembly Controller, Assembly Drill, and Input and Export Units to create our Assembly Line. You'll also need Chests next to the Input and Export Units for Items. Once ready, give the Assembly Controller some Pressure and it'll start right up. The Atomic Forge is a very fancy Oritech Machine. Place down the Forge and surround it with Machine Casings. Then Right Click the Forge to Build it. The Atomic Forge doesn't get Energy a normal way, because why would it be easy? Instead you'll need Enderic Lasers! Build an Enderic Laser, Power it up, then use a Target Designator to Shift Right Click both the Forge and the Laser to set it.

Asks for: Mechanical Press, Atomic Forge, Assembly Controller

However you get them... you'll need 2. Sorry! I should have warned you beforehand.

Asks for: Allthemodium Ball Base, Unobtainium Ball Base, Vibranium Ball Base

Like literally every other step, there's multiple ways to form our Mechanisms. You can use Deployers to smack a Ball Base with first a Nugget, then a Shaft, then the other Ball Base to create a full Mechanism. We also have PneumaticCraft's Pressure Chamber. You'll need a Pressure Chamber Interface, 2 Valves, and either Pressure Chamber Walls or Glass. The Interface is how you get Pressure into the Pressure Chamber, yes it will need Pressure to Craft it. The Valves are how Items go in (through the Blue Side) and out (through the Orange Side). The Walls or Glass will fill up the rest of the structure besides the center. That needs to be hollow. The Assembler (different from the Assembly Line) is perfect for our detailed 2x2 Crafting Recipes. First, we'll need to make our Machine. Place down the Assembler with 3 Machine Casings in a 1x2x2 design. Then, Right Click the Assembler to assemble it. Now we can give it some Energy and it will make us our Mechanisms!

Asks for: Deployer, Assembler, Pressure Chamber Interface

Allthemodium, Vibranium, and Unobtainium Pokeballs are special Balls, so we'll need special Mechanisms for them!

Asks for: Allthemodium Ball Mechanism, Unobtainium Ball Mechanism, Vibranium Ball Mechanism

Through the magic of Ars Nouveau we can forge together Unobtainium and Allthemodium into one single Alloy Ingot! For it we'll need a few Ars componenets. An Enchanting Apparatus along with 1000 Source will be needed to complete the Ritual. For the Ritual we'll also need Water, Earth, Air, and Fire Essence. These are all Crafted with various Ars Items. We'll also need Piglich Hearts. We don't Kill Piglichs anymore, they're now called Piglichus and we now capture them as slaves. Capture a Piglichu in a Pokeball and put them in a Pasture. Then, they will generate Piglich Hearts randomly. Final Items are our Unobtainium and Allthemodium Ingots. With everything ready we'll combine them and get our Alloy!

Asks for: Unobtainium - Allthemodium Alloy Ingot

There's 3 ways to make the Great Ball of Fire Lid. Simplest is using Create. Place the Great Ball Lid under a Spout to pour a Buckets worth of Soul Lava over it. We can also Build a Refinery by placing down the Refinery with 9 Machine Casings in the pattern shown by highlights. Just Right Click the Refinery to start it up. Then, once Energy is cabled in, Soul Lava piped in, and a Great Ball Lid is put in, we can make our Great Ball of Fire Lid. If counting Buckets worth of Fluid is too difficult, make a Pressure Chamber instead. There you can just combine the Bucket of Soul Lava with the Great Ball Lid to make the Great Ball of Fire Lid.

Asks for: Spout, Refinery, Pressure Chamber Interface

It kinda looks like it has two eyes... Two angry eyes...

Asks for: Great Ball of Fire Lid

To make our Great Ball of Fire we can use our Pressure Chamber from before, Deployers, or an Assembler. You know about the Pressure Chamber and Deployers. The Assembler will need 3 Machine Casings with it in a 1x2x2 shape to start it up. Just power it up and toss in the Items.

Asks for: Deployer, Assembler, Pressure Chamber Interface

The Great Ball of Fire will need its Lid, a Blank Lid, a Sturdy Mechanism, and an Iron Rod to be created. Once all are combined through whichever process you choose, you'll finally have it. This Ball has a 2x Chance at almost every Pokemon Type, except for 50x for Fire Types and 0x for Water Types. Yeah, not the best for Catching Mudkips...

Asks for: Great Ball of Fire

To Craft our Lids we need Blank Lids, Apricorn Bits, and a Blocks worth of the Ingot. As well as using the Assembly Line from the previous Quest, or Spouts and Deployers with Create, or a Pressure Chamber. With Create we need to use a Spout to pour 810mB of the Ingot onto the Blank Lid. That is 9 Ingots worth. Then, use the Deployer to smack the Lid with the Apricorn Bit to make our Lid! The Pressure Chamber is from Pneumatic Craft, just like the Assembly Line. The Pressure Chamber is a Multiblock Machine. It uses either Pressure Chamber Walls or Glass to make up most of it. While the Valves are what take in Pressure and the Interfaces take in and out Items from Inventories. If the Blue Face is out of the Pressure Chamber, this is the Input. If it is Orange, then it is Output!

Asks for: Spout, Assembly Controller, Pressure Chamber Interface

After spending our Bit, Blank Lid, and Blocks worth of Ingot, we can Craft our Ball Lids. I think the Allthemodium one looks coolest!

Asks for: Allthemodium Ball Lid, Unobtainium Ball Lid, Vibranium Ball Lid

We got our Lids and our Mechanisms, let's finally make our Pokeballs! The only extra Items we'll need is a Blank Lid and an Iron Rod. We can use Deployers, a Pressure Chamber, or an Assembly Line to put it all together. Come on, by now you should know how to use them!

Asks for: Deployer, Assembly Controller, Pressure Chamber Interface

The Allthemodium Pokeball has a 4x Chance at Catching any Pokemon. No strings attached! 4x is the highest most Pokeballs will go to besides the Quick, Love, and Beast Ball. The Vibranium Pokeball has a 6x Chance at Catching any Pokemon. Legendaries are the best of the best Pokemon, also the rarest of course. The Unobtainium Pokeball has a 10x Chance, rising to 30x for Legendaries. The only Pokeballs that are better are the Origin Ball and...

Asks for: Allthemodium Ball, Unobtainium Ball, Vibranium Ball

No matter the Pokemons Level, Type, Rarity, ETC. the Master Ball will Catch them (if they aren't already Caught). It is also essential to Crafting the ATM Star!

Asks for: Master Ball

While the Ancient Unobtainium Lids are made differently, the Ball isn't. Assembler, Pressure Chamber, or Create! Ancient Mechanism, plus Lids, plus Iron Rod.

Asks for: Ancient Unobtainium Ball

There's only one way to make the Ancient Origin Ball and that's through Create Processing! It starts by squishing an Ancient Unobtainium Ball in a Press. Then, Deploy the Origin Lid onto it. After, comes an Unobtainium-Allthemodium Alloy Ingot, a Nether Star, then another Unobtainium-Allthemodium Alloy Ingot. Last is Deploying a Blank Ball Lid to finish our Ancient Origin Ball. The Origin Ball is the Ancient version of the Master Ball, now in a sleek Red color! It will be needed to Craft the various Pika Stars!

Asks for: Ancient Origin Ball

With a very strange Item selection we can Craft the Rubber Stamp! Funny enough, you don't need Create to Craft it, just to use it. I wonder what the symbol is that we are stamping onto stuff though...

Asks for: Rubber Stamp (Lid)

By using a Deployer, we can push the Rubber Stamps on some Nuggets to Stamp them! This will be necessary to make the Mechanisms. The Sturdy Sheet is made by processing Obsidian Dust first by Spouting Lava over it, then Pressing it, twice!

Asks for: Stamped Brass Nugget (Lid), Stamped Copper Nugget (Lid), Stamped Iron Nugget (Lid), Stamped Sturdy Sheet (Lid), Stamped Zinc Nugget (Lid)

Depending if your Plates are Stamped or not determines which Machine you can use. If it is Stamped you can use the Mechanical Press to make the Ball Bases. If not, try these! The Assembly Line connects different Assembly Machines together to work together at processing Items. Place down the Assembly Controller, Assembly Drill, and Input and Export Units to create our Assembly Line. You'll also need Chests next to the Input and Export Units for Items. Once ready, give the Assembly Controller some Pressure and it'll start right up. The Atomic Forge is a very fancy Oritech Machine. Place down the Forge and surround it with Machine Casings. Then Right Click the Forge to Build it. The Atomic Forge doesn't get Energy a normal way, because why would it be easy? Instead you'll need Enderic Lasers! Build an Enderic Laser, Power it up, then use a Target Designator to Shift Right Click both the Forge and the Laser to set it.

Asks for: Mechanical Press, Atomic Forge, Assembly Controller

Ball Bases! Yeah I should have told you the Zinc will make the Iron Ball Base, I apologize. We'll need 2 Ball Bases for each Mechanisms. Plus more Items with the Deployers to create the Mechanisms.

Asks for: Brass Ball Base, Copper Ball Base, Iron Ball Base, Sturdy Ball Base

Like literally every other step, there's multiple ways to form our Mechanisms. You can use Deployers to smack a Ball Base with first a Nugget, then a Shaft, then the other Ball Base to create a full Mechanism. We also have PneumaticCraft's Pressure Chamber. You'll need a Pressure Chamber Interface, 2 Valves, and either Pressure Chamber Walls or Glass. The Interface is how you get Pressure into the Pressure Chamber, yes it will need Pressure to Craft it. The Valves are how Items go in (through the Blue Side) and out (through the Orange Side). The Walls or Glass will fill up the rest of the structure besides the center. That needs to be hollow. The Assembler (different from the Assembly Line) is perfect for our detailed 2x2 Crafting Recipes. First, we'll need to make our Machine. Place down the Assembler with 3 Machine Casings in a 1x2x2 design. Then, Right Click the Assembler to assemble it. Now we can give it some Energy and it will make us our Mechanisms!

Asks for: Deployer, Assembler, Pressure Chamber Interface

Each Mechanism makes a different Tier of PokeBall. Copper makes the default PokeBalls and the Safari and Heal Ball. Iron makes Great Balls and a few others like the Net and Dive Balls. Brass makes Ultra Balls, Love and Luxury Balls and a bit more. Sturdy Ball Mechanism will make Dream and Beast Balls!

Asks for: Brass Ancient Ball Mechanism, Brass Ball Mechanism, Copper Ancient Ball Mechanism, Copper Ball Mechanism, Iron Ancient Ball Mechanism, Iron Ball Mechanism

We got our Lids and our Mechanisms, let's finally make our Pokeballs! The only extra Items we'll need is a Blank Lid and an Iron Rod. We can use Deployers, a Pressure Chamber, or an Assembly Line to put it all together. Come on, by now you should know how to use them!

Asks for: Deployer, Assembly Controller, Pressure Chamber Interface

Now you can Create just about any Ball you want to. Some might be more expensive! If you want Ancient Balls you'll need to use Ancient Ball Mechanisms and Apricorn Wood Lids. All of these Balls are also entirely identical to normal Balls, just you made them instead of finding them!

Asks for: Allthemodium Ball, Ancient Allthemodium Ball, Ancient Great Ball of Fire, Ancient Unobtainium Ball, Ancient Vibranium Ball, Great Ball of Fire